Jam RETRO Classic+ Gebrauchsanleitung Seite 4

B – CONNECTING TO A DEVICE
Once turned on, the speaker will immediately search
for a device to pair to. If a device has not been
previously paired, the LED light on the top of the
speaker will flash red and blue alternatively. Enable
Bluetooth ® on your device. From the Bluetooth
menu, select "JAM Classic+". When the device and
JAM Classic+ are connected, you will hear a tone and
the LED light will turn solid blue momentarily then
move to a slow flashing blue.
You may also connect your device to the "Classic+"
speaker using an aux cable, which is not included.
Note: Once paired, the speaker will remember the
device every time it is turned on. To disconnect the
speaker from the device, press and hold the "play/
pause" button for 3 seconds. You will hear a tone
and the LED light at the top of the speaker will flash
red and blue. The "Classic+" is now ready to pair to a
new device.
C – BUTTON FUNCTION
Quickly press the "play/pause" button once to play
your music.
To increase the volume, turn the volume dial
clockwise; to lower the volume, turn the volume
dial counterclockwise.
To skip forward a track, quickly press the button
once; to skip back a track, quickly press the once.
EN
®
...4s
JAM
Classic+
JAM
Classic
...1x
...1x
...1x
4