General Description; Scope Of Delivery; Function Description; Overview - Parkside Performance PPHSA 40-Li A1 Originalbetriebsanleitung

GB IE
The­device­is­part­of­the­Parkside­X­20­V­
Team series. The device must be used with
batteries from the Parkside X 20 V Team
series.
Before use, check that the blades
are­sharp.­Ensure­that­the­blades­
are­sharpened­whenever­blunt,­in­
order to avoid overstressing of the
machine. Damages caused by cut-
ting with blunt blades are not cov-
ered by the guarantee.
General Description
­ See­the­front­fold-out­page­for­
illustrations.
Scope of delivery
Carefully­unpack­the­trimmer­and­check­
that­it­is­complete.­Dispose­of­the­packag-
ing material correctly.
-­ Cordless­hedge­trimmer
-­ Blade­guard­
-­ Clippings­collector
-­ Instruction­Manual
The clippings collector is inserted in
the blade bar guard box on delive-
ry.
The rechargeable battery and charg-
er are not included in delivery.
Function Description
The cordless hedge trimmer features a
high-quality­knife­made­from­special­laser-
cut steel. When trimming, the cutting teeth
move to and fro in a linear shearing mo-
tion.­The­strike­guard­at­the­tip­of­the­knife­
prevents­unpleasant­kickback­reactions­
22
when­hitting­walls,­fences,­etc.­Operators­
are­protected­by­the­appliance's­two-hand­
safety­switch­and­quick-stop­brake­func-
tion.­The­hand­protection­guards­your­
hands against twigs and branches.
The­clippings­collector­clears­the­clippings­
from the hedge for horizontal cutting.
Read the sections below to learn more
about­each­operating­element's­function.

Overview

1 Strike guard
2 Safety knife bar
­ 3­ Hand­protection
4 Front handle
5 Ventilation slots
­ 6­ Operational­control
7 On/Off switch
8 Rear handle
9 Blade guard
­ 10­ Clippings­collector
11 Charge level indicator
12 Button for charge level indicator
13 Button for setting the cutting
speed
14 Charger
15 Battery
16 Battery release buttons
17 Safety switch
18 Screw
­ 19­ Suspension­device­on­the­under-
side of the device

Technical Data

Cordless
Hedge Trimmer ...... PPHSA 40-Li A1
Motor­voltage­U .......... 40 V
Motor­speed ............................2800­rpm
Stroke rate n ........................1800­rpm
max
Cuts­per­minute .... 2000/3000/3600­rpm
Cutting length .......................appr.­58­cm
Length of knife ...................appr.­600­mm
; (2 x 20V)