Pepperl+Fuchs ecom Tab-Ex 03 DZ1 Betriebsanleitung Seite 22

WWAN and WiFi
Insert the tray back into the tray slot.
If you insert the tray into your device while
the tray is wet, your device may be
damaged. Always make sure the tray is dry.
Fully insert the tray into the tray slot to
prevent liquid from entering your device.
STEP 5
ΠTighten the two screws (Torx T8) of the tray unit with a torque screwdriver to a torque
of 0.26 Nm.
 Tighten the two screws (Torx T8) of the IP cover with a torque screwdriver to a
torque of 0.26 Nm.
Œ

Removing the memory card
Before removing the memory card, first unmount it for safe removal.
Launch the Settings app and tap Device care → Storage → Advanced → SD card →
Unmount.
Do not remove external storage, such as a memory card or USB storage, while the
device is transferring or accessing information, or right after transferring data.
Doing so can cause data to be corrupted or lost or cause damage to the external storage
or device. ECOM is not responsible for losses, including loss of data, resulting from
the misuse of external storage devices.
22