Specifications; Installation Work; Dimensional Data - Hitachi KNX001 Installations- Und Betriebshandbuch

3. Specifications

Cover
Dimensions
Weight
Power Supply
Assembly
CSNET WEB Port
KNX Port
Indicators LED
Push button
Port type
Configuration
Firmware
Temperature range
Relative Humidity
Protection
RoHS Conformity
Certification
¹ For servicing purposes. Not avalaible

4. Installation work

When unpacking the KNX001, check that it has not suffered damage during transport.

4.1 Dimensional data

PMML0137A rev0 - 06/2008
PC plastic type (UL 94 V-0). Grey. RAL 7035.
Width 107mm - Height 90 mm - Depth 58 mm
2 kg
9 a 30 VDC ±10% 1.4W.
24 VAC ±10% 1.4VA.
Terminal: Screw type removable (2 poles) for 2.5 mm2 (12 AWG) cable.
Surface, Wall an over rail DIN EN60715 TH35.
1 x Ethernet 10BT RJ45. - (TCP/IP Modbus protocol)
1 x KNX TP1 (EIB) Opto insulated. Screw type removable (2 poles) for 2.5 mm2 (12 AWG) cable
1 x Power Supply.
2 x Ethernet Port activity (LNK, ACT).
1 x programming KNX.¹
RS232. DB9 female (DCE) connector DB9.
By RS232 port.
Updates allowed by RS232 port
-40°C a +70°C
5% a 95%, without condensation
IP20 (IEC60529).
RoHS compliance according, directive 2002/95/EC.
CE
KNX001 - Installation Manual
2 x KNX Port activity (Tx, Rx)
1 x programming/bus KNX.¹
(mm)
90
9