Xiaomi Mi Robot Vacuum-Mop 2 Pro+ Benutzerhandbuch Seite 11

Before Use
Charge the Vacuum-mop
Place the vacuum-mop onto the charging dock. The vacuum-mop will
automatically turn on and begin charging. The indicators of buttons
and on the vacuum-mop will slowly blink white while charging, and
remain lit once fully charged.
Battery Level Indicator
White:
Battery level > 15%
Orange:
Battery level ≤ 15%
Notes:
· Fully charge the vacuum-mop before using it for the first time. This will take about 6
hours.
· To ensure safety while charging and to prevent the mop pad from damaging floor
surfaces, please remove the mopping assembly prior to charging.
Connect with Mi Home/Xiaomi Home App
This product works with the Mi Home/Xiaomi Home app*. Use the Mi
Home/Xiaomi Home app to control your device, and to interact with other
smart home devices.
Scan the QR code to download and install the
app. You will be directed to the connection
setup page if the app is installed already. Or
search "Mi Home/Xiaomi Home" in the app
store to download and install it.
Open Mi Home/Xiaomi Home app, tap "+" on
the upper right, and then follow prompts to add
your device.
* The app is referred to as Xiaomi Home app in Europe (except for Russia). The name
of the app displayed on your device should be taken as the default.
Notes:
· Only 2.4 GHz Wi-Fi networks are supported.
· The version of the app might have been updated, please follow the instructions
based on the current app version.
Reset Wi-Fi
When there is a connection loss between your phone and the vacuum-
mop due to the router reconfiguration, wrong password or so, please
open the cover of the vacuum-mop so that you can see the Wi-Fi
indicator. Simultaneously press and hold the buttons
hear a voice saying "Waiting for the network configuration". Once the Wi-
Fi indicator is slowly blinking, the Wi-Fi has been successfully reset.
and until you
10