Troubleshooting - Kenwood LS-600BT Bedienungsanleitung

Notes on using a USB device
This device is capable of playing audio files stored on a flash memory or digital audio player if these
devices have a USB port (these devices are referred to as USB Devices in this document).
The following restrictions apply to the usable USB Devices:
Usable USB Devices
• USB Devices that belong to the USB Mass Storage Class.
• USB Devices whose maximum power consumption is 500 mA or less.
• USB Mass Storage Class: USB Devices that the PC recognises as external storage without the need
for a special driver or application software.
• Consult your dealer if you are not sure whether your USB device complies with the specifications for
the USB Mass Storage Class.
• Using a USB device that is not supported may result in erroneous playback or display of the audio
file.
Even if you use a USB device that meets the above specifications, audio files may not play back
properly depending on the type or condition of the USB device.

8. Troubleshooting

Problem
No function
No sound
The Soundbar does not
respond at the touch of a
button
Problems with the
BLUETOOTH connection
Remote control not
functioning
Problems with HDMI
playback
No audio in OPTICAL
mode
No audio in USB mode
14
Solution
• Is the mains adapter properly connected?
• Is the volume fully turned down?
• Increase the volume on the playback device, if needed.
• Is the source used correctly connected?
• Remove the mains adapter and reconnect t again.
• BLUETOOTH on the device deactivated?
• BLUETOOTH set as source?
• Is the telephone, etc. paired with another BT device?
• Are the BLUETOOTH versions incompatible?
• Outside the range of the remote control?
• Are the batteries weak?
• Is the Soundbar sensor blocked by objects?
• Is the sensor of the Soundbar exposed to direct sunlight?
• Are you using an ARC compatible HDMI cable?
• Is your TV ARC compatible?
• Have you set the correct audio format on the TV?
Please consult the Operating Instructions of the TV.
• Try another optical cable.
• Have you set the correct audio format on the TV?
• Please make sure that exclusively MP3 files are in the USB memory.
• Use another USB memory.