Troubleshooting; Maintenance And Care - Kenwood AS-50BT Bedienungsanleitung

6. Troubleshooting

Notes on troubleshooting
Problem
No function
No sound
No BLUTOOTH connection
Poor sound quality in BLUTOOTH
mode

7. Maintenance and care

Cleaning the housing: Use a cloth lightly moistened with a mild detergent. Do not use detergents
containing alcohol, ammonia or scouring agents.
Cautions on condensation
Condensation (dew) may form inside the unit if there is a significant difference between the temperature
of the unit and the ambient temperature. If condensation occurs inside the unit, proper function is no
longer guaranteed. In this case, you have to wait a few hours; After the moisture has dried, the device
can be reused.
Special care should be taken in the following circumstances
When the unit is moved from one place to another at a much higher or lower temperature, or when the
humidity at the installation site increases, etc.
Solution
• Is the battery empty? Charge the battery.
• Has the loudspeaker switched off automatically?
• Has the volume been turned down all the way? Increase the
volume on the playback device, if needed.
• Are the playback device and the loudspeaker paired?
• Is a plug plugged into the AUX-IN socket?
• Is the interrupting objected between the playback device
and the loudspeaker? This can be, e.g. walls or other elec-
tronic devices. If needed, change the location of the playback
device or the loudspeaker.
• Is the playback device too far away from the loudspeaker?
Please bring the two device close to each other.
• Increase the volume on the playback device.
• Is the charge level of the battery too low?
9