Aux Mode; Audio Input; Audio Output; Usb Mode - Kenwood LS-600BT Bedienungsanleitung

• Press the <INPUT> button on the remote control or the <STANDBY> button on the Soundbar to
select the OPTICAL mode.
• Set the volume and the sound mode with the corresponding button on the remote control.
Please note:
If you connect a device such as a TV/Set-Top-Box/DVD/Game console via an optical cable, set the
audio output mode of the device to PCM mode (digital optical output). Do not bend the optical
cable, as otherwise the light conductors on the inside can be damaged.

6.3 AUX Mode

Connect the Soundbar and the TV with the supplied audio cable.

Audio Input

• Press the <INPUT> button on the remote control or the <STANDBY> button on the Soundbar to
select the AUX mode.
• Set the volume and the sound mode with the corresponding button on the remote control.

6.4 USB mode

The Soundbar automatically switches to the USB input mode if a USB Stick is inserted.
If a USB Flash drive is inserted and the Soundbar is switched on, press the <INPUT> button on the
remote control or the <STANDBY> button on the Soundbar to switch to the USB input mode, if this
does not happen automatically. Music will be automatically played on the USB input. This mode is
only available if a USB Flash drive is connected.
• Make sure that your USB Flash drive contains MP3 audio files (other file types are not supported).
• Connect the USB Flash drive to the USB connection of the Soundbar and the music will start to play
automatically.
• Control the playback using the <Playback/Pause>, <Skip track forwards> and <Skip track
backwards> buttons.
• Set the volume and the sound mode with the corresponding button on the remote control.
12

Audio Output