Technical Data / Scope Of Delivery / Inserting The Battery - Julius Mayer JMHS-1 Originalmontageanleitung

TECHNICAL DATA / SCOPE OF DELIVERY / INSERTING THE BATTERY

Technical data
Input voltage:
Transmission frequency:
Working current:
Quiescent current:
Transmit power:
Protection class:
Permissible ambient temperature:
Range:
Channels:
Compatibility:
* Range data are approximate values and depend on the structural conditions.
Scope of delivery
1. Handheld transmitter incl.
battery
2. Wall bracket incl.
mounting material
Instruction manual
Inserting the battery / changing the battery
The battery is (depending on the transmitter model) supplied loose or already installed and secured against discharge with a pro-
tective foil discharge with a protective film. Open the rear cover, remove the protective foil and insert the battery with the
into the battery compartment with the + (plus) side facing up.
Then close the battery compartment again.
Use a tool (e.g. sim card pin, mini screwdriver, fine needle) to press the fuse button and slide the battery cover
down.
16
3V battery (type 2430)
433,05 - 434,79 MHz
< 15 mA
< 1 µA
< 10 mW
IP 30
+10°C to +50°C
Open field: approx. 150m* / indoors: approx. 30m*.
1-channel (JMHS-1) | 15 channels (JMHS-15)
JULIUS MAYER Radio Drives & Receivers
Handheld transmitter JMHS-1 or
1
Handheld transmitter JMHS-15
Depending on the frequency of switching opera-
tions, we recommend replacing the battery at least
every 2 years.
2
Wall mount incl.
Mounting material