Herunterladen Inhalt Inhalt Diese Seite drucken
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

4 - Electrical connection

4.1 - Power supply
produce
Ecodesign Directive observe
Variant A
Remote controller with radio
remote receiver for the socket
(Art.-No. 890839)
Variant B
Remote controller with
surface-mounted receiver
for the wall (Art.-No. 890838)
Caution!
Risk of material damage due to excessive connection voltage! Mains vol-
tages above 253 volts can destroy electronic components. Make sure that
the rated voltage of the mains is 230 volts.
The infrared heater has a three-core connection cable with a length of 1.9
m at the end of which a Schuko plug is mounted.
According to EU Ecodesign Directive 2009/125/EC - concretized for the
product area of individual room heaters in Regulation 2015/1188 - opera-
tion of this infrared heater as a stationary individual room heater is only
permitted if certain control/regulation requirements are met.
Detailed information on this can be found, for example, on the Internet at:
- https://www.umweltbundesamt.de/themen/wirtschaft-konsum/
produkte/oekodesign/oekodesign-richtlinie
- h tt p : //e u r- l ex .e u ro p a .e u / l e ga l - co n te n t / D E /A L L / ? u r i = C E -
LEX%3A32015R1188
To meet the above requirements and for comfortable operation of this
infrared heater, Welltherm GmbH off ers a range of control components.
In the following we will deal with the electrical connection of these com-
ponents.
Stecken Sie für die Stromversorgung den Schuko-Stecker der Heizung
in den Funk-Steckdosenempfänger.
Attention. The electrical connection of the optionally availab-
le X3D radio receiver may only be carried out by a qualifi ed electrician!
- Connect the ground line of the mains to the yellow-green connection
line of the infrared heater.
- Connect the phase (conductor) of the mains to the terminal 4.
- Connect the neutral conductor of the mains to the terminal 3.
- Connect the terminal 2 with the blue connection line of the infrared
heater.
- Connect terminal 1 to the brown connection line of the infrared heater.
29

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis