Product Related Information; Notes On Documentation; Product Description - welltherm BP 550 Serie Installation Und Betriebsanleitung

2 - Product related information

2.1 - Notes on the
Documentation
Applicable documents
note
Keep documents
Validity of the instructions
Item number Format in cm
BPWS0550 60,0 x 120,0 x 2,2
BPWS0660 60,0 x 150,0 x 2,2
BPWS0850 60,0 x 180,0 x 2,2
BPWG0550 60,0 x 120,0 x 2,2
BPWG0660 60,0 x 150,0 x 2,2
BPWG0850 60,0 x 180,0 x 2,2
BPSP0550 60,0 x 120,0 x 2,2
BPSP0660 60,0 x 150,0 x 2,2
BPFA0550 60,0 x 120,0 x 2,2
BPFA0660 60,0 x 150,0 x 2,2

2.2 - Product description

It is essential to observe all operating instructions supplied with the com-
ponents of the system.
Keep these instructions and all other applicable documents for further
use. for further use.
These instructions apply exclusively to:
Item number
BPBI0550
BPBI0660
BPPB0550
BPPB0660
BPPB0850
BPMA0550
BPMA0660
BPMA0850
The product is an infrared heater that emits heat to objects through inf-
rared waves. The warm objects then in turn emit heat to the surroundings.
The product is equipped with a safety temperature limiter that switches
the product off in the event of overheating and switches it on again auto-
matically after a cooling phase.
The product should be used in combination with the following compo-
nents:
- X3D 310EL and X3D Minor 1000 radio thermostats.
- X3D surface-mounted radio receiver and X3D radio socket receiver
- Opening detector X3D DO BL TYXAL
- Gateway TYDOM 1.0
The product is exclusively suitable for wall mounting.
The maximum surface temperature at an ambient temperature
of 20 °C is: 110 °C.
Format in cm
60,0 x 120,0 x 2,2
60,0 x 150,0 x 2,2
60,0 x 120,0 x 1,7
60,0 x 150,0 x 1,7
60,0 x 180,0 x 1,7
60,0 x 120,0 x 1,7
60,0 x 150,0 x 1,7
60,0 x 180,0 x 1,7
23