Tripod Mounting - welltherm HPK0650 Installation Und Betriebsanleitung

Tripod mounting:

1
- The tripod is attached using the tripod bracket (Art. 13686).
- The stand must have a secure footing and must not fall over.
- The minimum height of the spotlight of 1.80 metres must be guaranteed.
- Mounting the bracket on the stand
2
- Mounting the radiant heater on the bracket
3
- Align the heater
- Tighten the screws in the desired position
- Adjust the height (min. 1.80 m)
- Position the heater so that there are no fl ammable elements
in the vicinity.
24