Assembly Diagrams And Instructions - Pessotto Raffaello Montageanleitung

Greasing / lubrication of moving parts (metal
mechanisms)
The cleaning of the metal parts must be carried out with a sponge and / or damp cloths. Do not
use solvents and / or abrasive materials.
ATTENTION: IN THE EVENT THAT ONE OR MORE PROBLEMS SHOULD OCCUR DURING THE OPE-
RATION OF THE PRODUCT, IT IS NECESSARY, BEFORE RETURNING IT TO OPERATION, TO FIND
OUT AND ELIMINATE THE CAUSES THAT HAVE GENERATED IT, ACTING WITH TIMELINESS OR
DAMAGE. WORST RISKS, TO THE MANUFACTURER.
To identify spare parts, use the references shown on the component itself. Once identified,
send a request to the manufacturer clearly indicating the model and description of the spare
part of interest.

ASSEMBLY DIAGRAMS AND INSTRUCTIONS

The parts list, diagrams and instructions for correct installation are shown in the following atta-
chment.
Every six months or every 60 cycles of use
Page 20