Residual Risk Areas - Pessotto Raffaello Montageanleitung

It is strictly prohibited to remove any safety, protection or signaling devices
(labels) off the product
Before starting any maintenance, cleaning or repair of the product, you must
have read and understood all the information contained in this manual.
Any maintenance and repair operations must be carried out by specialized
craftsmen.
Never place the product near heat sources.
Position, install and lock the "wall-mounted table", in a stable manner in com-
pliance with the instructions given in this manual.
The movement area of the "hideaway wall table" system must be kept cle-
ar of objects, things, animals or people that can limit free movement of the
system or damage to them.
The instructions and rules contained in this manual must always be re-
spected.

RESIDUAL RISK AREAS

In some areas of the "wall-mounted table" system there are residual risks that could not be
eliminated during the design phase.
RESIDUAL RISKS
Cuts, abrasions, crushing as a result of
wear, damage to components / mate-
rials or breakage of the same due to
incorrect installation
Cuts, abrasions, crushing as a result of
the operation of the product
• DANGERS OF CRUSHING During
the movement of the table top there
are residual risks, there are residual ri-
sks of crushing the hands between the
moving parts of the mechanism and
the fixed structure of the table (residual
risk of crushing)
• MAKE SURE that in the areas
where the table rests or above the
table itself there are no people, animals
or things that could collide with han-
dling
Failure to comply with the characteristi-
cs provided for the product
Page 17
EXPECTED ACTIVITY
Respect the methods of installation and use of the
product as reported in the use and maintenance
manual.
Carry out periodic checks and maintenance as de-
scribed in this manual.
Respect the warnings and dangers identified on
the product by means of special pictograms (risk of
crushing during the opening and closing phases. Do
not bring parts of the body close to moving parts
during opening and closing actions.
Periodically check and maintain the collapsible sy-
stem as shown in the plan shown in this manual.
Carry out systematic maintenance and periodic
checks as per the plan shown in this manual.