Battery Installation; Start Robbie - Xtrem Bots Robbie Bedienungsanleitung

3. batteries installation
in the transmitter
1. Use a philips' head screw to open the battery compartment lid of controller.
2. Put 2 x 1.5V "AA" batteries inside the battery box.
3. Put the gate back and use a screw to tighten the gate.
in the robot
Robot battery is into the back of Robbie.
To charge Li-Po battery, please insert the USB port provided USB
charging cable to anyone USB port of power pack, mobile charger, car
charger or computer.
Switch OFF the robot before charging. A light in the robot will be
turned on during the charging process; when the robot is fully charged
the light will turn off.
The charging time is about 2 hours and the playing time is about 3
hours.

4. start Robbie

Switch on the ON/OFF button on the front of Robbie (1). Robbie
introduce himself performing some movements and sounds.
NOTE: The robot should stay on the floor.
(1)
6