Introduction; Device Description And Scope Of Delivery; Proper Use; Safety Information - Scheppach EPHS1800 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment and
success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this device assumes no liability for
damage to the device or caused by the device arising
from:
• Improper handling,
• Failure to comply with the operating instructions.
• Repairs carried out by third parties, unauthorised spe-
cialists.
• Installing and replacing non-original spare parts,
• Application other than specified,
• Failure of the electrical system in the event of the
electrical regulations and VDE provisions 0100, DIN
13 / VDE0113 not being observed.
Please consider:
Read through the complete text in the operating manu-
al before installing and commissioning the device.
The operating manual is intended to help the user to
become familiar with the machine and take advantage
of its application possibilities in accordance with the
recommendations.
The operating manual includes important instructions for
safe, proper and economic operation of the device, for
avoiding danger, for minimising repair costs and down-
times, and for increasing the reliability and extending the
service life of the device.
In addition to the safety instructions in this operating
manual, you must also observe the regulations appli-
cable to the operation of the device in your country.
Keep the operating manual package with the machine
at all times and store it in a plastic cover to protect it
from dirt and moisture. They must be read and careful-
ly observed by all operating personnel before starting
the work.
The device may only be used by personnel who have
been trained to use it and who have been instructed
with respect to the associated hazards. The required
minimum age must be observed.
18 | GB
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description and scope of
delivery (Fig. 1)
1. Radiator, 1x
2. Fascia board, 2x
3. Bracket, 2x
4. Base plate cover, 1x
5. Base plate, 1x
6. Screw M4x10, 6x
7. Washer, 2x
8. Screw ST3,5x16, 2x
9. Hexagonal bolt M6x50, 4x
10. Remote control, 1x
11. Roller, 2x
12. Foot sleeve, 2x
13. Foot, 2x
14. Washer D6, 4x

3. Proper use

Use the device to heat surfaces in covered and uncov-
ered outdoor areas.
The device is designed for private use and is unsuita-
ble for commercial use.
The device is intended exclusively for floor installation.
Intended use includes the heating of surfaces:
• in storage rooms
• in construction site rooms
• in containers
• in the catering trade
• at trade fairs and events
• in covered outdoor areas (e.g. covered terraces)

4. Safety information

Please read the operating manual before using the heater.
Store this operating manual in a safe place for future
reference.
1 When using electrical devices, basic precaution-
ary measures must always be observed. Failure
to follow these instructions may result in fire,
electric shock or other injury or property damage.
www.scheppach.com