INVERTO.TV Scena 5mIDL 5650S Handbuch Seite 27

Channel: Select the desired channel from the list using the "Up" and "Down" navigation keys. Confirm the selection
with the "OK" key.
Name: Select an event name that will be displayed in the Personal planner list. This name has no influence on
the real programme name. You can delete incorrect entries with the "Red" function key and enter new ones with
the numeric keys 2-9. In this menu, the letters behind the alpha-numeric keys on your remote control are active
(GSM SMS-like).
Start date: Select the start date of the event using the directional keys "Left" and "Right" to select the day,
month, or year. To set desired value use the directional keys "Up" and "Down". Confirm your entries with the "OK"
key.
Start time: Select the starting time of event. Use the directional keys "Left" and "Right" to select the hour or
minutes. To set the desired value, use the directional keys "Up" and "Down". Confirm your entries with the "OK"
key.
End date: Select the end date of the event. Use the directional keys "Left" and "Right" to select the day, month,
or year. To set the desired value, use the directional keys "Up" and "Down". Confirm your entries with the "OK"
key.
End time: Select the end date of the event. Use the directional keys "Left" and "Right" to select the day, month,
or year. To set the desired value, use the directional keys "Up" and "Down". Confirm your entries with the "OK"
key.
Mode: The Event Mode can be "Automatic" or "Notification". If "Automatic" mode is selected, the event will be
executed automatically without any notification. If "Notification" mode is selected, 3 minutes before the event
time, the pop-up menu with notification will be displayed on your TV set. Now you can confirm or cancel the
event using the "Green" of "Red" function keys.
If the action is not confirmed within 3 minutes, the receiver will cancel the event automatically. Confirm your
selection by pressing the "OK" key .
Cycle: You can set the event to "Single" execution, "Daily" every day execution, "Weekly" execution once per
week, or "Monday to Friday" execution from Monday to Friday. Confirm your selection by pressing the "OK" key.
Note: "Single" cycle events are automatically deleted from the Personal Planner list, after they are successfully
executed.
Deleting an event in the Personal Planner
To delete an event from the Personal Planner, you can use the "Up" and "Down" navigation keys to select the
event and then press the "Red" function key. After the pop-up message appears, confirm the event by pressing
the "Green" function key or cancel by pressing the "Red" function key or "Exit" key.
Editing events in the Personal Planner
To edit events in the Personal Planner, use the direction keys "Up" and "Down" to select the event you want to
edit. Press the "OK" key enter the edit dialog. This edit pop-up is identical to the edit pop-up described in the
previous chapter on Adding and deleting events in Personal planner.
Changing the event modes in the Personal Planner
If you have an event that is not finished yet, or in progress, you can change the recording mode between
"Record", "Tune" and "Reminder" by pressing the "Record" key. With the "Green" function key you can choose if
the event will "Auto switch" or "Notify". With the "Yellow" function key you can choose if the event will be "Single",
"Daily", "Weekly" or "Monday to Friday."
If the event is added via the EPG the user is able to use only the "Yellow" function key to choose between
"Single", "Daily", "Weekly", "Monday to Friday" or "Series."
Note: The function keys do not have to be confirmed by pressing the OK/Menu-key. The modes shown at
the bottom of the Personal Planner window are the next modes that will be set when pressing the associated
function keys. You can press the colored function keys repeatedly to cycle through the different modes available.
Note: While watching a TV programme, you may start a recording at any time by pressing the "Record" key on
the remote control. The receiver will start recording immediately. You can stop the recording by pressing the
"Exit" key.
22