INVERTO.TV Scena 5mIDL 5650S Handbuch Seite 15

Band switching
The receiver uses a 22kHz signal to control the band of the LNB. If you do not know if your LNB supports this
feature, set the option to Auto.
Primary and secondary DiSEqC
You can connect up to two cascadable DiSEqC switches to the receiver. This option allows you to set the type
and input port for each switch.
Channel ID (Unicable only)
This option allows you to select the Unicable channel ID for the receiver. In a typical Unicable LNB installation,
you are able to connect multiple receivers to a single LNB, with each receiver set to connect to a different
Unicable channel ID.
LNB Feed (Unicable Monoblock only)
This option allows you to select which feed of a Unicable Monoblock LNB you want to use for this receiver.
CHanneL SeaRCH
In order to view video programs, you must first do a
channel search.
SaTeLLITe SeaRCH
In this option there are 3 options that user has to set before
start satellite search (see picture):
1. Scan mode:
• Select Quick Scan to search for channels on the
transponders in the preset transponder list for the
selected satellite.
• Select Complete to search for channels on all
transponders for the selected satellite (also called
"blind search").
2. Channels:
• Select All to search for all Free-to-Air and Pay TV
channels.
• Select Free-to-air to search only for Free-to-air
channels.
10