Herunterladen Inhalt Inhalt Diese Seite drucken

INVERTO.TV Scena 5mIDL 5650S Handbuch Seite 21

Pvr-ready high definition receiver
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Aspect Ratio SD / HD
Use this option to specify the screen aspect ratio of the
connected TV set – 4:3 or 16:9.
Aspect Ration Conversion SD / HD
Set to Auto in order to adopt the Aspect Ratio of the picture
to match with the aspect ration of the broadcast
Digital Audio Out
Use this option to specify desired audio type on the digital
audio output (SPDIF). This option is valid for the optical
and coax outputs.
OSD over VCR SCART
Use this option to specify if you want to have the OSD
appear on the VCR SCART outputs.
Note: This option is available only if TV SCART is set to
RGB.
TIMe / DaTe
Use this menu to set the time and date.
Automatic Time Update
If the "Automatic Time Update" is set to "On", the receiver
will receive the time and date automatically from the
broadcast signal.
Note: Some networks may transmit incorrect time or date.
Date
Use this option to manually set the date.
Local Time
Use this option to manually set the time.
Time Zone
The DVB standard broadcast time and date is for the GMT
time zone. In order to display the local time correctly, you must set the local time zone.
Note: If daylight savings is enabled then the receiver is changing automatically the time on the following
condition (valid for Europe with no time limit).
summer times begins and ends at 1:00 am universal time (Greenwich mean time)
it begins the last Sunday in March
it ends the last Sunday in October.
This is done in disregard of DVB broadcasted information.
DefauLT SeTTIngS
Use this option to reset the receiver to default settings. This may be necessary when a large number of settings
have accidentally been made incorrectly, for example.
As you can see in the picture, there are three kinds of
default settings: "Factory defaults", "Settings only" and
"Preprogrammed Channel Lists".
Factory Defaults
Press the "OK" key and confirm with the "Green" function
key, if you want to reset the unit to the "Factory default"
settings.
Note: Using this option will delete all data stored in the
channel lists, and favourite lists.
After this, a "Quick Start Guide" menu will be open. Please
refer to the Quick Start Guide section of this user manual
for further information.
16

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis