Cleaning And Maintenance; Problem Solving - FROMM & STARCK STAR ATFE 05 Bedienungsanleitung

The display can show the changed value with a delay.
To exit the programming mode, press the T button.
After 10 seconds of inactivity, the panel will automatically return to normal
operation.
3.3.
a) Always unplug the device before cleaning it.
b) Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.
c) Do not spray the device with a water jet or submerge it in water.
d) The device must be regularly inspected to check its technical efficiency and
spot any damage.
e) Use a soft cloth for cleaning.
f) Use a soft, damp cloth for cleaning.
g) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a
metal spatula) because they may damage the surface material of the
appliance.

PROBLEM SOLVING

APPLIES TO ALL MODELS:
Problem
E01/E06/E07/
E12/E22
HOT
E02
E04
E05
Range: 0
(disabled) –1
(enabled).

Cleaning and maintenance

Description
There is a problem with network - pull the plug out
of the socket. If the problem persists, replace the
control box.
HOT Overheating - Stop working for approximately
18 minutes and let the device cool down.
E02 The columns don't rise evenly - reset the
system.
E04 The panel doesn't work - check the
connection, disconnect and reconnect the panel.
E05 The system has recognized a risk of collision
been
saved.
A-F
change
has not
been
saved.