Werbung
Verfügbare Sprachen
Verfügbare Sprachen
144/1 Baritone saxophone stand
INTENDED USE
- Tripod folding stand for holding baritone saxophones
FEATURES & CAPABILITIES
- Wobble-free stand on three feet
- Ease of handling without the use of tools
- Suitable for rehearsal room, studio, stage and mobile use;
-
the compact package is ideally suitable for transport and storage
- Both mounting brackets are completely encased in high-quality plastic,
-
whose rubber-like properties protect the instrument from scratching
- The large bracket can be adjusted to the shape of the saxophone, thanks
-
to steel core
- The lower support bracket can be positioned in three places as required
- Root circle ø 730 mm, height 790 - 930 mm, weight 1.8 kg
Thank you for choosing this product. Please read and follow these instructions carefully. It informs
you about all important steps necessary for safe installation and operation. We recommend that you
keep them for future reference.
SAFETY INSTRUCTIONS
- Always carry out a visual inspection before use;
-
damaged components must not be used any further.
- Ensure a suitable and level surface.
- Due to the nature of the moving parts trapping hazards can arise:
-
therefore careful handling is indispensable during construction,
-
operation and dismantling.
- For maximum stability, always pull the foot tubes apart as far
-
as they will go. Root circle should not be less than 700 mm.
- The extension tube must be at least 50 mm deep in the clamp.
-
Lower insertion depth reduces tight fit of tube and bracket.
- We recommend that stand adjustments only be done with the
-
instrument removed beforehand.
- Bending the mounting bracket up or in requires effort and should
-
be carried out by a suitable person;
-
Bending range: max. +/- 40 mm in width.
- Always place the instrument carefully in the stand.
- The parquet protectors are made of high-quality material and thus
-
as far as technically possible free from plasticisers; for protection of
-
very sensitive floors (possibly certain types of parquet) a non-slip
-
underlay should be used if necessary.
INSTALLATION INSTRUCTIONS
1. COMPONENTS
2./3. SET UP THE STAND
4. ADJUSTMENT OPTIONS 4.1 POSITION - BOTTOM BRACKET a.1
4.2 POSITION - MOUNTING BRACKET TOP b.1
4.2.2 ALIGNMENT
4.2.3 HEIGHT 1
4.2.5 HEIGHT 2
Werbung
