Safety Instructions - RexXer RE-06-020 Gebrauchsanweisung

NOTE! Before you start using the powered tool, you
have to read carefully the general safety precautions,
this instruction and keep them for further use.
This equipment must not be used by people (including
children) with restricted physical, sensory or psychical
capacities or those who don't know it or are not
experienced enough to use it, unless they do it
supervised or according to the user's manual provided
to them by individuals responsible for their safety.
Prevent children from playing with the equipment

1 SAFETY INSTRUCTIONS

Please read this manual carefully before using the device.
The laser rangefinder
measurement of distances, areas and volumes.
Do not use the rangefinder for purposes other than those
intended.
Do not attempt to disassemble or modify the device.
Never aim light at the sun, another person or moving
objects.
2 START
a. Inserting batteries
- Open the battery lid.
- Insert the battery according to its polarity (+) and (-)
- Close the battery lid.
b. Buttons
1- Measurement
2- Volume / Area measurement.
3- Indirect measurement -Pythagoras
4- Plus
5- Save
6- Minus
7- Reference point (button illumination)
8- Cancel / Turn off
9- Unit change
c. Display
1- Laser
2- Reference edge measurement (front)
3- Reference edge measurement (back)
4- Multifunctional measurement
is intended for interior
5- Pythagoras
6- Continuous measurement
7- Battery level
8- Memory
9- Alarm
10- Alarm level
11- 3rd display line
12- 2nd display line
13- 1st display line
14- Result
3 FIRST USAGE
Press the power button to start the device.
Hold the power button to turn it off.
After 2-minutes of non-use, the rangefinder switches off
automatically.
To cancel the last measurement or reset the display,
press both save and cancel buttons at the same time.
Press and hold the backlight button to turn the
illumination on.
Press and hold the backlight button again to turn it off.
4 DEVICE OPERATING
Single measurement:
Press the measurement
measurement mode.
Press it again to start measuring.
The measurement result will be displayed on the device
screen in real time.
Continuous measurement:
Press the measurement
measurement mode.
Press and hold it again until you hear a single high-
pitched tone.
This means that the device has entered continuous
measurement mode.
Continuous measurement helps determine which object
is located further away from the device.
In this mode, the longest and the shortest distance are
displayed in real time.
Press the button again to stop the continuous
measurement. The results will be shown on the display.
The device will automatically exit the continuous
measurement mode if it is performed more than 1000
times.
button to enter the
button to enter the
9