Technical Data; Sound Emission; Service Department; Storage - Powerplus Powx070 Gebrauchsanweisung

Caution: When removing or cleaning the brushes eye protection and a dust
mask should be worn; particularly if using dry air.
Clean or change the brushes in a well ventilated area and ensure everyone
in that area also wear the appropriate protection.
12

TECHNICAL DATA

Voltage / frequency
Power
Maximum speed (n0 )
Blade size (TCT)
cut capacity
90° - 0°
90° - 45°
45° - 0°
45° - 45°

SOUND EMISSION

Noise emission values measured according to EN 50144
Sound pressure level
Sound power level
Vibration
ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
13

SERVICE DEPARTMENT

Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a particular
connecting cable which is available from our service department. Replacement of the
connecting cable must only be carried out by our service department (see last page) or by a
qualified person (qualified electrician).
14

STORAGE

Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry place,
avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don't keep it in plastic bags to avoid humidity build-up.
Copyright © 2008 VARO – Vic. Van Rompuy N.V. – www.varo.com
86.0 dB(A)
99.0 dB(A)
1.297 m/s²
POW X070
230 V ~ 50 Hz
1800W
4800 rpm
Ø255 x Ø30 mm - 60T
165 x 50mm
120 x 80mm
165 x 35mm
120 x 35mm
EN
P a g e | 13