Interface Display - PowerBoozt Powerbank Bedienungsanleitung

Main operation interface and screen

1.Interface display

�
�
�
� �
�
2.Description
No. Functional Description
BAR/PSI unit switch button,
and it can also be used as a
1
forced start function switch
The button for presetting tire pressure:
When the tire pressure is presetting,
numbers will blink; The blinking will
stop after the setting is completed. You
3
may then exit the setting mode. At the
same time, the real-time tire pressure
will be displayed on the screen
Red light (Abnormal warning
indicator for emergency jump
5
start function)
Battery indicator light
(Power: 20%、 40%、 60%、 80%、
7
100%； Charging: Marquee)
USB: USB Status Indicator
9
BAR / PSI: Tire pressure units
11
setting indicator light
13 Numerical display area
�
�
�
�
�
�
��
��
� �
��
No.
10
12
��
��
�
��
�� ��
Functional Description
Power button (Short press to
turn on, long press for 2
2
seconds to turn off)
Air inflator start-stop
button:
Hold down the button for 3
4
seconds to turn on. Press
down quickly to turn off
Green light (ON: Forced
start mode output; Blinking:
6
Normal start mode output)
8 IN: Charging status indicator
ERR: abnormal state alarm
indicator
V: Output voltage detection
status indication and units
�
� �