Error Code Display Description - PowerBoozt Powerbank Bedienungsanleitung

8. Error code display description

ERROR
NO. EXPLANATION
CODE
When charging or starting,
1 001
other functions are not allowed
2 110 Charging overvoltage protection
Charging over-voltage
111
3
(secondary) protection
Charging over temperature
4 120
protection
Charging under temperature
5 130
protection
Discharge undervoltage
6 140
protection
Discharge over temperature
7 150
protection
Discharge under temperature
8 160
protection
9 200 Communication abnormal
10 310 Air inflator short-circuit protection
11 320 Air inflator over-current protection
When starting, the current air Pressure
12 330
is greater than the set air pressure
When starting, under-voltage
13 410
protection
Before starting, under-voltage
14 411
protection
Start over temperature protection
15 420
The external battery voltage is
16 430
greater than the device voltage
17 440 Ignition clip shorted
18 450 Abnormal clamp connection
19 460 Start short circuit protection
Abnormal cell voltage drift
20 470
protection
21 480 Continuous start protection
REASON/SOLUTION
Disconnect the charger or
exit the start mode
Disconnect the charger
Disconnect the charger
Wait for the product to cool down
Put the product at the
right temperature
Connect the charger
Wait for the product to cool down
Put the product at the right
temperature
Restart the device
Restart the device
Restart the device
Reset the proper air pressure
Connect the charger
Connect the charger
Wait for the product to cool down
1. The display voltage is lower than 12V,
and the device voltage is low. Please
connect the charger to recharge.
2. If the display voltage is higher than
12V, the car battery is normal; or the car
battery voltage is too high, which is not
suitable for this product, please use an
jump starter that supports higher
voltage
Connect the battery correctly
Connect the battery correctly
Restart the device
/
Wait 30 seconds and start again