Overall Dimensions - Meccanica Fadini GASPO 252 Anleitung

GASPO 252
- semiautomatic - with gas springs
BOLLARD FITTING INTO THE ENCLOSURE
To facilitate the fitting operations into the
enclosure, we advise to bring the bollard to
standing out position. Then sink the assembly
into the enclosure and fixing it by the M10x20
TSEI SS steel screws.
F A D IN
I
l'a p
ric anc ello

OVERALL DIMENSIONS

ø 200
thickness 4 mm
ø 275
6450
GB
Drwg. No.
GASPO 252 FUNCTIONING
Lowering the bollard:
- Insert the shaped spanner into the lock under the bollard cover.
- To unlock the bollard, turn the spanner anticlockwise and lower it completely.
- When the bollard is completely lowered, to lock it in down position and be allowed to
remove the spanner, turn clockwise.
Resetting the bollard:
carry out the previous operations in reverse order: insert the spanner, turn it
anticlockwise to unlock and lift the bollard, then turn clockwise to lock the post and
be allowed to remove the spanner.
1
F A D IN
I
l'a p
ric anc ello
Bollard finish
Complete Gaspo 252 weight
Weight of housing and plates
Impact resistance
Breakout resistance
[A] Various factors, such as the compaction index, soil permeability coefficient and kind
of concrete may reduce the values indicated even significantly.
INSTRUCTIONS GASPO 252
2
F A D IN
I
l'a p
ric an ce
llo
RAL 7016 anthracite grey
63 kg
23 kg
30.000 J
[A]
160.000 J
[A]
3