Overall Dimensions - Meccanica Fadini SIBLI 17 Anleitung

SIBLI 17
INOX - removable
2)
Once satisfied that the housing socket is firmly set in the concrete foundation, hold Sibli 17 by the handling ring and drag it
into the socket by means of the roller fitted at the bottom.
Once the bollard is properly fitted into the socket, swing the flap cover aside and insert the customized key into the high
security lock barrel, push it thoroughly into it and give two turns anti-clockwise: in this way, Sibli 17 is firmly locked into its
seat. To unlock and remove Sibli 17, carry out the previous operations in a reverse order. Once Sibli 17 has been pulled out of
its seat, it can be stored away in its support cradle; fit the socket with the provided cover.
Lock flap cover
Stainless steel
armoured square
bollard
Ground socket
Socket
cover
Push the key fully in and give two turns anti-
clockwise to lock Sibli 17 into the ground
socket

OVERALL DIMENSIONS

ø 314
120x120
240x240
140x140
ø 314
3851
GB
Drwg. No.
Handling ring
Storage
cradle
Guide roller
375x340
INSTRUCTIONS SIBLI 17
View of Sibli 17 armoured square bollard
mounted into its socket
Customized
key
Storage
cradle
Weight of the bollard
Weight of the ground socket
Impact resistance
[A]
Breakout resistance
[A]
[A] Various factors, such as the compaction index, soil permeability coefficient
and kind of concrete may reduce the values indicated even significantly.
20 mm approx.
higher than
pavement
Ground socket
Socket
cover
39 kg
14 kg
20.000 J
250.000 J