Meccanica Fadini GASPO 252 Anleitung Seite 4

GASPO 252
- semiautomatic - with gas springs
FITTING OPERATIONS
Fix the anchoring plates to the ground housing cylinder by the provided bolts, then provide a suitable foundation plinth made of
reinforced concrete around it, according to the rule of the art and following the dimensions indicated in the drawing. The reinforced
metallic structure (not supplied by the manufacturer) is to be positioned around the ground housing cylinder very close to it in a
way that the anchoring plates be incorporated. The ground housing cylinder must be flat with the ground level.
Fixing plates
to cement
0.0
SECTION VIEW OF THE PLINTH
6450
GB
Drwg. No.
M10x30 TEI screws
Ground housing cylinder
Gaspo 252
Metallic framework to be
provided as a reinforcement
to set in the concrete
foundation around the
ground housing cylinder
Gravel layer to provide
a soak-away system
~ 70x70 cm
foundation plinth
INSTRUCTIONS GASPO 252
ø 10 n° 8 pcs.
600
Ground housing cylinder Gaspo 252
Metallic framework to be
provided as a reinforcement
to set in the concrete
foundation around the ground
housing cylinder
Concrete foundation
Gravel layer
for water drainage