Internal Cleaning; External Cleaning - Coldmaster BABY Betrieb Und Instandhaltung

REGOLAZIONE E PULIZIA
CONTENTS
1. Unpacking instructions.
Cleaning:

2. Internal cleaning.

3. External cleaning.

Using the accessories:
4. Shelves adjustment.
5. The roller-curtain.
6. The price holder.
WARNINGS
(see picture 10)
It is most important that this instruction booklet is kept together with the appliance both for future reference and for
reasons of safety. 1 . Adults should operate this appliance only. Do not allow children to use the controls or play with it.
2 . It is forbidden to modify in any way the main functions and characteristics of this appliance. . The electrical installation of
the appliance should be carried out by a qualified electrician or other competent person. . Never attempt to carry out repairs
unassisted. Inexpert repairs can cause serious damage and malfunction. . Assistance has to be provided by an authorized
engineer only. Always use original spare parts. . This appliance is not suitable for the storage of basic commodities not
including food-stuffs. . The manufacturers of this appliance accept no responsibility for the consequences of misuse in 7
contravention of these safety instructions. It further reserves the right to carry out improvements without prior notice.
installing the cabinet directly in line with sunlight. .
stoves, etc) and drafts (such as windows, doors, ventilation systems, air conditioning, etc ...).
free from obstruction for at least 30 cm.
edges. 12 . If damp air or products to be refrigerated should cause ice to form on the evaporator, we recommend stopping the
compressor and placing the goods in special refrigerated containers, kept at the same temperature, until defrosting is
completed;if this is not carried out the compressor will continue to operate leading to a wasteful consumption of electricity
and poor performance.
1. UNPACKING INSTRUCTIONS
CARDBOARD PACKAGING 1.
the appliance and the pallet . Lift the appliance . Using a T-wrench, unscrew the bolts in the holes under the pallet, which
keep it fixed to the appliance. . Repeat the operation for all other bolts.
appliance on a horizontal level surface. . Fit the two spacers in the suitable holes in the back of the appliance.
8. Make sure there is nothing left inside the packaging before disposal.
facilitate disposal. (see picture 1)
2. INTERNAL CLEANING
1 . Clean internal elements and shelves with a soft sponge and neutral detergents.
3. EXTERNAL CLEANING
1. For the external surfaces use the same products used for the internal cleaning.
4. SHELVES ADJUSTMENT
1. The appliance is provided with 4 internal shelves, adjustable at 4 different heights . To change the height, it is sufficient to
push the shelf upwards, removing it in order to have access to the supporting screws. . Unscrew the 4 supporting screws and
screw them again in one of the 4 possible positions.
MODELS 15-18 ONLY: 1.
order (see picture 2)
5. THE ROLLER-CURTAIN
The appliance is provided with a roller-curtain to protect food from insects and dust.
sufficient to grab its handles and push them downwards.
Notice : It is advisable to use the roller-curtain during the night or the off-duty period. This in order to reduce power
consumption, reducing the loss of cold (see picture 3).
6. THE PRICE HOLDER
The appliance is provided with 4 lines of price holders placed on the 4 shelves. . To put the prices, it is sufficient to insert,
between the transparent PVC tongue and the shelf profile the price card, simply putting it inside from above (see picture 4)
Connection and controls:
7. Connection to the mains.
8. Controls.
9. Checking the correct functioning.
Regular maintenance:
10. Cleaning of the condenser.
Occasional maintenance:
11. Replacement of the lamps.
Diagrams:
Wiring Diagram (Pg. 4)
Diagram of refrigeration unit (Pg. 5)
6
9 Never install the appliance near sources of heat (such as radiators,
11 . Ensure that the products displayed on the shelves and grills do not hang over the
Cut the strap and lift up the cardboard packing.
. 3 . 4
5
7
4.
2.
Raise the shelf. Turn it downwards . Remove it.
5
6. Lower the fork of the fork-lift truck and place the
9. Separate the different packaging materials to
2.
2.
Replace the shelf on the supporting screws in the new position.
. 3 4.
2. Fix the handles downwards, to the hooks showed by the arrows.
1
8
3
4
10 . Keep the ventilation grills
2. Insert forks of fork-lift truck between
Dry with a soft cloth.
Dry with a soft cloth.
. 2
3
Replace it in the new position, in reverse
1. To open the roller-curtain, it is
GB
8
. Avoid