Laser Receiver - Nedo ACCEPTOR 2 digital Bedienungsanleitung

EN Operating instructions
10

3 Laser receiver

3.1 Display and operating elements of the laser receiver
Display lights up: limited remaining life
1
(battery approx. 5h / rechargeable battery approx.
1h). Display flashes: Switching off imminent, replace
rechargeable batteries/batteries!
Lights up if the laser line is within the sensor window
2
but below the zero line. In addition, the red LED next
to the reception field lights up and a slow intermittent
LCD display DETECTOR FIELD RESOLUTION
Displays the currently set resolution:
3
fine = ±1 / middle = ±4 mm /
rough = ±6 mm - without mm-indicator (both
Lights up if the laser line is located at the level of
4
the zero line. In addition, the green LED next to the
reception field lights up and a continuous tone is also
Lights up if the laser line is within the sensor window
5
but above the zero line. In addition, the yellow LED
next to the reception field lights up and a fast intermit-
6
7
Shows the distance to the reference / zero marking
LCD display ACOUSTIC SIGNAL
8
Display = acoustic signal quiet/
No Display = acoustic signal off
Button ACOUSTIC SIGNAL
9
Switches the acoustic signal between
10
Switches the receiver on and off.
Button DETECTOR FIELD RESOLUTION
Switches the resolution between
11
fine = ±1 / middle = ±4 mm /
rough = ±6 mm - without mm-indicator
LCD display BATTERY
LCD display LOWER
tone is also emitted.
Display symbols are flashing)
LCD display TARGET
emitted.
LCD Display HIGHER
tent tone is also emitted.
LCD display „mm"
Shows the unit.
LCD display "height"
Display = acoustic signal loud/
loud/quiet/off.
Button ON/OFF
1
8
7
11
10
2
3
4
(3)
5
6
(2)
(4)
(5)
9