Laser Receiver; Displays And Controls Of The Laser Receiver - Nedo ACCEPTORpro Bedienungsanleitung

EN Operating instructions
16
5 Laser receiver
5.1 Displays and controls of the laser receiver
1 Display lights up: limited remaining life
(battery approx. 5h / rechargeable approx. 0,5h)
Lights up if the laser line is within the sensor
2 window but below the zero line. In addition, the
red LED next to the reception field lights up and
Lights up if the laser line is located at the level
3 of the zero line. In addition, the green LED next
to the reception field lights up and also a
Lights up if the laser line is within the sensor
4 window but above the zero line. In addition, the
yellow LED next to the reception field lights up
and also a fast melody sounds.
LCD display DETECTOR FIELD RESOLUTION
5 Displays the currently set resolution:
4=±4mm / 2=±2mm / 1=±1mm / 0=±0.5mm
LCD display ACOUSTIC SIGNAL
Display = acoustic signal loud/
6
Display = acoustic signal quiet/
No Display = acoustic signal off
7 Switches the acoustic signal between
8
Switches the receiver on and off.
Button DETECTOR FIELD RESOLUTION
9 Switches the resolution between
±4mm / ±2mm / ±1mm / ±0.5mm.
LCD display BATTERY
LCD display LOWER
also a slow melody sounds.
LCD display TARGET
continuous melody sounds.
LCD Display HIGHER
Button ACOUSTIC SIGNAL
loud/quiet/off.
Button ON/OFF
1
9
8
2
3
4
5
6
(2)
(3)
(4)
7