Maintenance And Storage - Auvon AS8016 Bedienungsanleitung

If the intensity is felt with a very strong level:
Possible Cause
1). Different area of your body will react differently. When in
the lower intensity, you may not feel the strength at first. If
you continue to increase the strength quickly, it may cause
the strength to increase suddenly and become unbearable.
Solution:It is recommended that for each increase in the
intensity level, feel for 1-2 minutes and then slowly increase
the intensity per the situation.
2). Each mode is different.
If the frequency or intensity of the mode is significantly
increasing in the middle and later stages at a lower level,
continuing to increase the intensity may be unbearable.
Solution: Be careful to increase the intensity when you feel
a significant increase in frequency or intensity in the middle
and later stages. If you have a slight discomfort, do not
continue to increase the intensity.

7. MAINTENANCE AND STORAGE

1. Unplug the output cord from the output jack of the
controller after using.
2. Cover both pads with the protective film before storage.
3. Never fold the massage pads.
4. To keep the controller clean, use a soft and dry cloth
for dust or a soft damp cloth for any dirt and smudges. Do
not use any cleaning solutions to clean the controller and
its pads.
5. Never apply the pads on any surface other than your
skin. If the pads become soiled or dirty, the adhesive power
may decrease. In this case, moisten the surface of the pads
with water and wipe away the dirty portion. This will allow a
temporary restoration of the adhesive power. However, too
Support@iauvon.com
32
UK