Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
How to set the timer
(1) The appliance must be switched on. Touch
the O
/ O
sensor.
N
FF
(2) An acoustic signal sounds and all indicators of the
cooking zones light up briefly. The appliance is in stand-
by mode.
(3) When you do not set a power level within 1 minute, the
appliance will switch off automatically. You have to start
at step 1 again.
(4) Select the cooking zone you want to control
via the timer using the relevant -selection
of cooking zone- sensor.
(5) Set the power level of the cooking zone
using the + / - sensors.
(6) Touch the sensor of the timer.
Depending on model.
8
(7) The Indicator of the Timer will show in the
timer display 10 and single digit 0 flashes
(8) Set the desired cooking time using the + / -
sensors.
→ Touch + or - once to increase / decrease
the value by 1 minute.
→ Touch and hold + or - to increase /
decrease the value by 1 minutes in fast
mode
8
.
(9) When you have finished the setting, the countdown of the
set time starts.
(10)
When the set time has elapsed, the relevant cooking
zone is switched off automatically.
(11) Repeat steps 4 - 7 to set the
zone.
If the timer is set for one cooking zone only, the other
activated cooking zones remain in operation after the
set time has elapsed.
55
for the other cooking
TIMER
WARNING!
Werbung
Inhaltsverzeichnis
