Welcome KMC-60AU Bedienungsanleitung Seite 43

 The wall sat the hob should be covered with heat-resistant
material, e.g. ceramic tiles.
2.3 Selection of the installation
environment / Dimensions
DANGER!
The appliance must be installed by a qualified
professional only. Do not carry out the installation
yourself. RISK OF ELECTRIC SHOCK!
Important safety instructions!
 When installing the appliance ensure optimal heat radiation
to maintain the operating safety.
 The wall and the reach of the heat radiation above the
worktop must be made of heat-resistant materials.
 To avoid any damage, the sandwich layer and adhesive must
resist heat.
 Provide an installation opening relevant to the dimensions
on the following drawings. For installation and use, a
minimum of 50 mm space shall be preserved around the
installation opening. (s. fig. below; -Dimensions of the hob-
).
 The thickness of the worktop must min. 28 mm. Choose
heat-resistant materials for the work top only to avoid any
deformation caused by the heat-radiation of the appliance.
Dimensions of the hob
A Height = 50 mm
B Width = 590 mm
C Depth = 520 mm
43