Welcome KMC-60AU Bedienungsanleitung Seite 52

(2) The Display indicates:
(3) An acoustic signal sounds and all indicators of the
cooking zones light up briefly. The appliance is in stand-
by mode.
(4) When you do not set a power level within 1 minute, the
appliance will switch off automatically. You have to start
at step 1 again.
(5) Place a proper cookware on the desired
cooking zone. Always keep the bottom of the
cookware as well as the cooking zone clean
and dry.
(6) Select the desired cooking zone by touching
the selection of cooking zone sensor.
(7) Set the power level using the + / - sensors.
→ Each cooking zone is equipped with 9
power levels (1 - 9).
→ Touch + or - once to increase / decrease
the power level by 1.
→ Touch and hold + or - to increase /
decrease the power level by 1 in fast
mode.
(8) The indicator of the relevant cooking zones indicates the
set power level.
(9) While cooking, the power level can be changed at any
time.
 When the power level -0- is indicated you can touch the
-
« » sensor once to set the power level setting -9- directly.
How to stop cooking
WARNUNG!
Never touch the cooking zones while the residual heat
indicator is still on. RISK OF BURNS!
The residual heat indicators indicate hot cooking
zones after use. The residual heat indicators go off as
soon as the relevant cooking zones have cooled down.
52
NOTICE!