Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN – ENGLISH
2. Grasping the Adjustment Knob, rotate it in the desired direction to adjust tension.
Clockwise (+ plus) direction to increase tension, or Counterclockwise (- minus) direction to
decrease tension. (Note that the knob has detents as it rotates) No tools are required.
3. Close locking lever and test operation of handle.
4. Repeat step 2 of inspection of components to verify that the handle is properly adjusted.
It is possible to adjust the handle to the point that the Locking Lever requires
excessive force to close. Do not exert excessive force as this may result in
damage to the device if the lever is forced closed.
Figure 12 Adjustment Knob
CAUTION!
22
Werbung
Inhaltsverzeichnis
