AmazonBasics B07DFVTFS8 Bedienungsanleitung Seite 5

Operation
Step 1: Filling (expanding) the hose
• Increase the water pressure of the tap gradually to fill the hose until it is fully expanded.
NOTICE
Keep water pressure under 5 bar.
Step 2: Manual water flow
Step 3 (optional): Switch to automatic water flow
• Switch to automatic water flow by engaging the latch.
1. Adjust the nozzle of the spray head to the desired setting.
(i.e. MIST, FLAT, SOAKER, CONE, RINSE, SHOWER,
VERTICAL, ANGLE and CENTER)
2. Adjust the knob on the trigger to change the power of the
water flow. Water flow is the heaviest when the knob is
tightly fastened.
3. Press the trigger to start the water flow.
5