ABOUT THE CONTROL BOX
The control box has the following protective features:
▪
Leakage protection
▪
Over-voltage/under-voltage protection
Overheat protection
▪
▪
Overload protection
If any of these protective features are enabled, the control box would stop the charging process. Once the
charge has stopped, the control box will perform a self-check to ensure the right operating conditions are
met so that it can restart.
If over-voltage or under-voltage has been detected, you will need to disconnect the cable first. Then
reconnect to the correct voltage supply.
LED Display status description
Condition
LED Display status
Initial mode
Green (1)
Initial mode
Light on
Waiting Connection
Light on
Charging mode
Racing light
Charging completed
Light on
Fault
Light off
Display
LED display: Shows all the charging dates:
Power/Voltage/Current/Time/Status
Switch
Charging: Indicates that the charge is taking place.
Green light 1
Initial mode
Green light 2
Status 1
Green light 3
Status 2
Red light
Fault mode
Green (2)
Light off
Twinkle (1s)
Racing light
Light on
Light off
Green (3)
Red (fault)
Light off
Light off
Light off
Light off
Racing Light
Light off
Light on
Light off
Light off
Twinkle