Airpress 45420-S Betriebsanleitung Seite 7

EN
Instruction manual for owner's use
(Translation of the original instructions)
• Lubricate tool when it is necessary. Daily oil will
not do any good to the tool.(22)
• Wipe tool clean daily and inspect for wear. Use
only nonflammable cleaning solutions if neces-
sary. Do not soak the stapler, because this will
result in damage of the O-ring and other parts. (23)
5. TROUBLESHOOTING
Read section "Safety warnings" before maintaining
the tool.
PROBLEM
Air leak near top of
tool.
Tool does nothing.
Sluggisch operation.
Air leak near bottom
of tool.
Poor return.
Weak drive.
Broken or worn
driver.
Poor feed.
Tool jamming.
Other problems.
7. TECHNICAL DATA
• pressure and air connection
CODE
45420-S Air Nail/Staple gun
45427-5 Air staple gun
45455-5 Air nail gun
45438-5 Air nail gun
45448-5 Air nail gun
45420-5 Air Nail/Staple gun
45423-7 Air Nail/Staple gun
SOLUTION
Tighten screws or install
head valve piston set.
Verify the air supply or
install head valve piston
set.
Install head valve piston
set.
Tighten screws or install
bumper or piston set.
Clean tool and install bum-
per or piston set.
Verify adequate air supply
or install piston set.
Install piston set.
Clean tool or lubricate ma-
gazine or install spring.
Clean tool or lubricate ma-
gazine or install spring.
Contact authorized dealer
or distributor.
NAME
WARNING: repairs other than those described
here should be performed only by trained, qual-
ified personnel.
For repair kit, please see parts list. For more informa-
tion other than repair kit, contact an authorized dealer
or distributor.
6. GUARANTEE
GUARANTEE PROVISIONS:
The machine/apparatus supplied carries a 12 month
guarantee, starting trom the day of purchase. If any
breakdowns occur within this period, caused by ma-
terial or structural defects, this guarantee will cover
parts as well as labour costs. This guarantee will not
cover claims if:
• The instructions in this manual have not been ob-
served.
• The machine / apparatus has been modified in
such a way that it no longer functions properly, not
even when damaged parts are replaced with the
proper components.
• Damage is due to frost, dropping, impact, unau-
thorized disassembly, improper connection to the
compressed air supply
• Damage is due to improper use or use which is
against destination of the device.
If the guarantee claim is accepted, the machine/ap-
paratus will be repaired and returned free of charge.
No other damages will be paid.
WORKING PRESSURE
5-7,5 bar
4-7 bar
4-7 bar
5-7,5 bar
5-8 bar
4-7,5 bar
4-7,5 bar
AIR CONNECTION
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
1/4"
7