Hama 00176615 Bedienungsanleitung Seite 5

6.2 Solar charging
• Install the supplied solar panel in a place that is
easily accessible by the sun using the enclosed
mounting kit.
• Connect the solar panel to the camera using the
micro-USB cable.
Warning - rechargeable battery
• Only use suitable charging devices or USB ports
to charge the product.
• Do not use defective chargers or USB ports and
do not attempt to repair them.
• Do not overcharge the product or allow the
battery to completely discharge.
• Avoid storing, charging and using in extreme
temperatures and at extremely low atmospheric
pressures (such as at high altitudes).
• When stored over a long period of time,
batteries should be charged regularly (at least
every three months).
• Operate this item only with the batteries
supplied.
• Use the supplied batteries only in conjunction
with this item.
• Use the supplied solar panel only in
conjunction with this item.
• In winter or when there is little solar power,
manual charging via a power supply unit
may be necessary even when operating with
solar charging.
4
7. Integrating devices into the Hama Smart
Home (Solution) app
• Insert the batteries as described above.
• The LED on the camera starts to flash quickly. If it
does not, press and hold the Reset button (8) on
the camera for around 5 seconds.
• Open the app and sign in.
• Press the + in the top right-hand corner to add
a new device.
My Home