Wiha 45215 Bedienungsanleitung Seite 25

To switch to the next Manual Range
When in Manual Range mode, apply short
press (less than 1 s) on the RANGE button.
After one beep sound release the button.
To switch back to Auto Range
When in Manual Range mode, apply short
press (less than 1 s) on the RANGE button.
After one beep sound release the button.
Relative
Use RELATIVE button to activate or deactivate the Relative function. Multimeter MUST
be in Auto Range mode before applying Relative function, unless it is in mV, continuity,
diode or temperature measurement, which operate in Manual Range mode only.
• When in Auto Range, long press (more than 1 s) on RANGE/RELATIVE button
activates Relative function (and at the same time Manual Range mode).
• When in Relative mode, long press (more than 1 s) on RANGE/RELATIVE button
will exit Relative function and set multimeter back to Auto Range mode.
To activate Relative function
When in Auto Range mode, press
RELATIVE button and hold it pressed (for
more than 1 s) until you hear double-beep
sound.
Multimeter enters Relative
and Manual Range modes
at the same time.
To deactivate Relative function and
switch back to Auto Range
Press RANGE button and hold it
pressed (for more than 1 s) until you
hear double-beep sound.
MANUAL RANGE
AUTORANGE
When multimeter exits Relative
function it also returns to Auto
Range mode.
RELATIVE
MANUAL RANGE
EN
25