Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Safety Instructions
! WARNING
Scope of Delivery
Mounting on the DIN Rail
! NOTE
12
Before putting the PROmesh P9+ into operation, check whether it is in perfect condi-
tion externally. Always observe the technical specifications of the device to ensure safe
and optimal use. The PROmesh P9+ is designed for IP20 protection environments. Take
appropriate measures to ensure proper operation of the unit in a different environment.
In case of suspected damage, please return the PROmesh P9+ immediately to your
supplier and do not put it into operation.
Do not open the housing under any circumstances. Unauthorized opening of the
housing will void any warranty claims.
The PROmesh P9+ is designed for use in PROFINET applications according to Confor-
mance Class B.
For complete support of the PROFINET standards, please also observe the selection,
layout and wiring of the data ports according to these standards.
•
PROmesh P9+
•
7-pole 5 mm terminal block (power supply and alarm contact)
•
Quickstart User Guide (hardcopy)
•
SD Card, can be used for backup and updates
Mount the PROmesh P9+ upright in the switch cabinet on a 35 mm DIN rail (DIN EN
60715).
The following distances to other modules must be observed:
•
right / left: 50 mm
•
top / bottom: 50 mm
ENGLISH
Werbung
Inhaltsverzeichnis
