Hama Touch Switch Bedienungsanleitung Seite 2

G Operating instruction
Thank you for choosing this
Hama product!
Take your time and read the following instructions
and information completely.
Please keep these instructions in a safe place for
future reference.
1. Explanation of warning symbols and notes
Risk of electric shock
This symbol indicates a risk of electric shock from
touching uninsulated product parts that may carry
hazardous voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to speci c hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.
2. Package contents
• 1 night light
• These operating instructions
3. Safety instructions
• The product is intended for private, non-commer-
cial use only.
• The product is intended only for use inside
buildings.
• Use the product only for the intended purpose.
• Protect the product from dirt, moisture and over-
heating and use it in dry environments only.
• Do not drop the product and do not expose it to
any major shocks.
• As with all electrical products, this device should
be kept out of the reach of children.
• Dispose of packaging material immediately in
accordance with the locally applicable regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
2
• Do not use the product in the immediate vicinity of
heaters, other heat sources or in direct sunlight.
• Only use the article under moderate climatic
conditions.
• Do not operate the product outside the power
limits given in the speci cations.
• Do not use the product in areas in which electronic
products are not permitted.
• Do not use the product in a damp environment
and avoid splashing water.
• The product must only be operated on a supply
network as described on the type plate.
• The light source of this light is not replaceable;
when the light source has reached the end of its
life, you need to replace the entire light.
• This product is not suited for lighting rooms in
indoor applications.
Risk of electric shock
• Do not open the device or continue to operate
it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains
cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali ed experts.
Warning
• Only operate the product from a socket that
has been approved for the device. The socket
must be installed close to the product and
must be easily accessible.
• If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the socket
strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.
4. Start-up and operation
• Connect the night light to an approved and easily
accessible socket.
• The night light has a touch function. Touch the top
of the light to switch it on and off.