Troubleshooting; Warranty; Ec Declaration Of Conformity - Powerworks P24IN Bedienungshandbuch

EN
Item
Charger operation tempera-
ture range
Battery storage temperature
range
Battery discharging tempera-
ture range
6

TROUBLESHOOTING

Problem
The inflator does
not work.
The machine
smokes during op-
eration.
7

WARRANTY

(The full warranty terms and conditions can be found on
Powerworks website)
The Powerworks warranty is 3 years on the product, and 2
years on batteries (consumer/private usage) from the date of
purchase. This warranty covers manufacturing faults. A faulty
product under warranty might be either repaired or replaced.
A unit that has been misused or used in other ways then
described in the owner's manual might be rejected for
warranty. Normal wear, and wear parts are not considered as
warranty. The original manufacturer warranty is not affected
by any additional warranty offered by a dealer or retailer.
A faulty product must be returned to the point of purchase in
order to claim for warranty, together with the proof of
purchase (receipt).
8 EC DECLARATION OF
CONFORMITY
Name and address of the manufacturer:
Name: GLOBGRO AB
Globe Group Europe
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Temperature
39°F (4°C) - 104°F (40°C)
32°F (0°C) - 113°F (45°C)
32°F (0°C) - 113°F (45°C)
Possible cause Solution
Turn off the infla-
The fan has stop- tor, wait for the
ped working to tool and battery to
protect internal cool down, then
circuits. start the tool
again.
The battery pack is Charge the battery
out of power. pack.
1. Immediately
stop the ma-
chine.
The machine has
2. Remove the
damage.
battery pack.
3. Contact the
service center.
English
Name and address of the person authorised to compile the
technical file:
Name: Micael Johansson
Address: Riggaregatan 53, 211 13 Malmö, Sweden
Herewith we declare that the product
Category:
Model:
Serial number:
Year of Construction:
• is in conformity with the provisions of the following
other EC-Directives:
• 2006/42/EC
• 2014/30/EU
• 2011/65/EU & (EU)2015/863
• 2000/14/EC
Furthermore, we declare that the following (parts/clauses of)
European harmonised standards have been used:
EN 62841-1, EN 1012, EN ISO 12100, EN 55014-1, EN
55014-2,EN ISO 3744,IEC 62321-3-1, IEC 62321-4, IEC
62321-5, IEC 62321-6, IEC 62321-7-1, IEC 62321-7-2, IEC
62321-8
Conformity assessment method to Annex VI Directive
2000/14/EC.
Measured sound power level L
Guaranteed sound power lev-
el
Malmö
Place, date:
02.02.2022
6
Inflator
PAM301
See product rating label
See product rating label
: 94 dB(A)
WA
L : 97 dB(A)
WA.d
Signature: Ted Qu, Quality Di-
rector