Electric Wiring - Lenoxx Designhauben PARSIFAL 90 – 120 Installationanleitung Und Betriebsanleitung

The downdraft allows a height adjustment of the structure from 820mm to 900mm from the floor to under the
work top. This adjustment is possible by working on the feet and on the feet supports (Fig. 1).
As for the height adjustment of the moving part of the downdraft, see Fig. 2.
According to the thickness of the work top and the cover, it is possible to adjust of 33mm.
The difference in thickness between the work top and the cover must be at least 17mm.
This adjustment is possible by acting on the two nuts that secure the central pivot of the actuator (Fig. 3).
Fig. 3

ELECTRIC WIRING

Safety Instructions:
• Before any manipulation of the controller power cord (230 volt)
• Before each operation, all devices connected
• Electrical connections must be performed by professionals