Use And Maintenance - Lenoxx Designhauben PARSIFAL 90 – 120 Installationanleitung Und Betriebsanleitung

USE AND MAINTENANCE

Before beginning any sort of cleaning and maintenance work, turn off the power of the downdraft by turning
the main switch to 0 (OFF).
Cleaning the metal filters
The metal filters fitted in the downdraft should be washed every 2-3 months depending on how much they are
used, using hot water and a non aggressive liquid detergent.
To access the metal filters, you must remove the cover from the downdraft. In order to remove the cover, take
the cover out from the downdraft and take off the cover lifting it upwards.
The metal filters can be removed using the special handle unhooking first the filter in the front part and pulling
up.
After washing the filters, they must be thoroughly dried and reassembled correctly.
Carbon filters
If the downdraft is used with the internal recycle filtering system, then active carbon filters must be used.
The active carbon in the filters traps the cooking smells.
Warning: The carbon filters can not be reused or washed and should be changed periodically (every 4 months if
the hood is used for two hours every day). Saturated filters cause fire hazards.
The carbon filters are placed underneath the metal filters.
For replacement, first remove the metal filters and then remove the carbon filters by using the handle of the
filter and pushing it towards the back. Then remove it by pulling upwards.
Cleaning the hood
If the downdraft is stainless steel, use specific products and rags for satin stainless steel (non-abrasive and / or
corrosive detergents free of chlorine), ensuring to clean in the same direction as the satin finish.
Do not use aggressive products, chemical solvents or derivatives of oil distillates that could leave oily traces
which could cause oxidation and polymerization.
The manufacturer is not responsible for damage to the surface of the downdraft due to failure to respect
these instructions.