Lenoxx Designhauben PARSIFAL 90 – 120 Installationanleitung Und Betriebsanleitung Seite 10

PARSIFAL CONTROL FUNCTIONS
PLEASE NOTE : THE SUCTION OF THE DOWNDRAFT CAN BE STARTED ONLY WHEN THE
DOWNDRFT IS COMPLETLY EXTRACTED.
BUTTON "A"
With suction motor turned on, every time the button is pressed the motor speed will be reduced of one
step.
BUTTON "B"
With the downdraft completely removed, the suction motor can be turned on and/or off.
While pressing the button long enough, the suction motor turns off automatically.
The activation of the timer is signaled by the blue flashing led and the suction motor turns off after 10
minutes.
BUTTON "C"
With suction motor turned on, every time the button is pressed the motor speed will be increased of one
step.
BUTTON "D"
By pressing the button once, the downdraft is completely extracted.
If the button is pressed while the downdraft is moving, the downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or "E".
BUTTON "E"
By pressing the button once, the downdraft returns in completely.
If the button is pressed while the downdraft is moving, the downdraft automatically stops.
To restart the movement, it is necessary to press button "D" or "E".
If the button is pressed when the suction motor is on, the motor automatically turns off.
NOTES:
- After 100 working hours of the suction motor, the red led, positioned under button "B", will start to flash
indicating the need to wash the metal filters.
To cancel the filters alarm, when the suction motor is switched off, you must press button "A" long
enough.
- At first use it is necessary to start the remote control learning.
When the downdraft is turned off, keep button "C" pressed for a long time.
The remote control learning is indicated with the flashing alarm filters led.
If, within one minute there is a valid remote control code (sent by pressing any button of the
the remote control), the led will be on continuously for 3 seconds and then it will turn off, indicating
the proper learning.