Bebecar Easymaxi XLi-00-NOVO Gebrauchsanleitung Seite 17

Removing the child from the car
• You can easily remove your child from the car safety seat by
unfastening the belts of the Easymaxi. The Easymaxi itself
remains positioned in the car.
• The carrying handle is to be put in the carrying position before
removing the Easymaxi from the car (illustration 8). You can then
unfasten the 3-point car safety belt and remove the Easymaxi
from the car.
• When carrying your baby or moving the Easymaxi, always
ensure that your baby is secured in the seat by means of the belt
of the seat.
Adjusting possibilities
Handle
• By simultaneously pressing the knobs on the side of the seat,
you can adjust the handle in the following 5 positions: rocking
position, extra safety position 1, carrying position, extra safety
position 2 and the car position (illustrations 21 through 25).
Position adjuster
• The Easymaxi can furthermore be adjusted in 2 different
positions by folding the position adjuster in or out.
Folded in: rocking position (only to be used in the home)
(illustration 14).
Folded out: car position or standing position (illustration 15).
Enlarging the child safety seat
As your child grows, you are to adjust the child safety seat
according to the following steps:
1 Remove the extra padded cushion (B) from the seat (illust. 19).
NB: DO NOT USE the extra padded cushion (B) when baby
is more than 60 cm.
2 Switch the position of the belts by pulling handle situated
behind the seat and move it to the desired position.
(illustration 17 A; B; C).
Reclinable backrest (reclined position)
NB: The seat must be reclined to the lie flat position when baby
is less than 60 cm.
First, press the button of the central adjuster and pull the belts of
the seat towards you until they have reached their maximum
length.
To recline, pull the fabric cushion of the seat forwards until it locks
in position.
To return to the sitting position, pull fabric cushion of the seat
forwards (a) and slightly lift (b) then slide it back (c) to its original
position (illustration 20).
Removal and maintenance of the upholstery
• You can remove the upholstery as follows:
- First unfasten the material at the head of the child's seat.
- Now unhook the upholstery at the height of the press buttons
(illustration 18).
- Pull the upholstery upward at the foot and unfasten the material
around the button of the central adjuster.
- Slide the belt cover off the safety belts.
• You can wash the upholstery by hand at a temperature of 30°C.
• The plastic parts can be cleaned using lukewarm water and
soap. Do not use any solvents to clean the car seat.
ENGLISH