Bebecar Easymaxi XLi-00-NOVO Gebrauchsanleitung Seite 16

IMPORTANT! KEEP FOR FUTURE REFERENCE.
General
• The Easymaxi is suitable for children with a stature between
40-80 cm.
• The Easymaxi is placed on the passenger's seat or the back
seat of the car in the rear position (illustrations 1 and 2).
• Always fold out the position adjuster (illustrations 2 and 9)
when using the Easymaxi in the car.
• Only use the Easymaxi in the passenger's seat if there is
no active airbag present.
• The Easymaxi is fastened in position using the 3-point seat belt
of the car that should have ECE approval no.16 or an approval of
equal quality. 2-Point belts are not to be used to fasten the
Easymaxi in a car.
• The carrying handle has 2 push buttons on each side. Press all
four buttons at the same time in order to adjust the carrying
handle (illustration 13).
Check that the buttons have clicked outwards after adjusting the
handle.
• The sunshade that is supplied with the Easymaxi can be
adjusted in various positions.
Placing your child in the child safety seat
• Press the button of the central adjuster and pull the belts of the
seat towards you until they have reached their maximum length
(illustration 3).
• Open the belts outward, place the child in the Easymaxi and
secure the child (illustrations 4 and 5). Place the locking parts of
the belts on top of one another (detail 5) and insert them together
in the safety lock until you clearly hear a 'click' (illustration 5).
• Now tighten the belt of the central adjuster by pulling it, so that
you child is securely seated (illustration 7). You can unfasten the
lock of the belt by pressing the red button (illustration 6).
• The handle should be put in the carrying position if you wish to
carry the Easymaxi (illustration 8).
Securing the child safety seat in the car
• Position the child's seat in the passenger's seat or on the back
seat in rearwardfacing position (illustrations 1and 2).
• Now place the carrying handle in the car position against the
back of the chair (illustration 9).
• The positions of the seat belt are indicated on the Easymaxi in
blue.
1 First, guide the seat belt along the back of the Easymaxi.
2 Guide the hip-belt through between the shell of the child safety
seat and the part below that (illustration 10).
3 Pull the hip-belt upwards in the belt guide (illustration 11), check
that the belts are not twisted and fasten the belt with a click
(illustration 11).
4 Tighten the shoulder belt and guide it through the belt slit at the
back of the child's seat, making sure there is no slack (illustration
12).
5 The position adjuster is to be put in the car position.
This will tighten the seat to the car.
ENGLISH