Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
to make heavy dough for no longer than 5 minutes at a time and then let it cool down
for 5 minutes.
8.
After the trial turn off the speed control knob at Speed "0".
9.
Press the lever knob and move the swiveling arm up, then take out the mixing tool from
the connector.
10.
Take off the blender safety cover (Fig. 1, No. 21) from the upper housing.
11.
Set the mixing jar onto the machine and pure a cup of water into the jar, and then repeat
Step 4, 5 and 6.
12.
You only need to lift the mixing jar up vertically to remove it instead of rotating it.
13.
Take off the mixing jar from the mixer and set the blender safety cover to the machine.
General Application Methods
1 Kneading Machine
1.1 Assembly and operation of kneading machine
1
Cover the drive shaft of the mixing drive with the blender safety cover:
a)
Insert the two hooks of the safety cover in the recesses on the appliance
b)
Turn the cover in the direction of LOCK arrow and press the safety cover down
at the same time.
c)
Release the cover. The safety cover is tightly attached to the appliance.
2. Cover the worm casing connector with cover:
Set the lock ring (Fig. 2, No. 14) to OPEN position.
d)
e)
Attach the front cover of meat grinder (Fig.1, No. 20) to the connector ring.
Turn the connector ring with the cover towards LOCK position.
f)
3
Press the lever knob with your right hand in the direction of the arrow. The swiveling arm
moves up. Move the swiveling arm with your left hand at the same time to the limit stop. The
swiveling arm must audibly lock in place. The lever knob moves back to its initial position.
4
Attach one of the mixing tools to be used with the protective disc to the drive shaft clockwise
and fix it to limit stop. The protective disc is used to prevent contamination or contact from
the drive shaft.
30
Werbung
Inhaltsverzeichnis
